MRC | Criteria | Characteristic |
---|---|---|
FEAT | SPECIAL FEATURES | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | AXIAL CLAMP SEALS CT3 DESIGN |
CPCW | HOUSING BORE DIAMETER | 0.937 INCHES NOMINAL |
ADUC | SEAL WIDTH | 1.125 INCHES NOMINAL |
NSN Parts Now, owned and operated by ASAP Semiconductor, is among the leading distributor of Mpd hard-to-find NSN parts. We have one of the largest inventories in the US, which features more than 2 billion parts from over 5000 leading manufacturers. That coupled with our No China Sourcing Pledge makes us one of the most reliable and preferred distributors in the USA.
Before You Leave, Consider Taking a Look at Our NSN Parts Catalog. Don’t forget That We Can offer Same-Day Shipping On Most of Our Inventory!
Request for Quote