| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | 0.2825 INCHES MINIMUM AND 0.4105 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.563 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 1.100 INCHES NOMINAL |
| AHLG | SECOND LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 0.143 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| AHLQ | SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AHLR | SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AHLS | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.219 NOMINAL INCHES |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.030 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.125 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| AHPZ | CENTER SECTION HEIGHT | 0.718 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| AHQB | CENTER SECTION THICKNESS | 0.0605 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| AHQP | FIRST LEG CORNER RADIUS | 0.125 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | CORNER RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| AKBU | SECOND LEG STYLE | CORNER RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | THREE SLITS IN FIRST LEG; HOLES ADJACENT TO SECOND LEG LG 0.087 IN. MIN 0.091 IN. MAX DIA; ADDITIONAL 0.180 IN. NOM DIA HOLE IN SECOND LEG ON 0.500 IN. CENTERLINE; ONE HOLE 0.093 DJA COUNTERSUNK TO 0.109 IN. DIA ON BOTH SIDES LOCATED ON CEN |
| MATT | MATERIAL | COPPER ALLOY 511 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B103 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
NSN Parts Now, owned and operated by ASAP Semiconductor, is among the leading distributor of Mpd hard-to-find NSN parts. We have one of the largest inventories in the US, which features more than 2 billion parts from over 5000 leading manufacturers. That coupled with our No China Sourcing Pledge makes us one of the most reliable and preferred distributors in the USA.
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Before You Leave, Consider Taking a Look at Our NSN Parts Catalog. Don’t forget That We Can offer Same-Day Shipping On Most of Our Inventory!
Request for Quote
