Quote in 15 min·24/7 × 365AS9120:2025 · ISO 9001:2015 · FAA AC 00-56B
NSN 3120-00-353-7979CAGE 0AX87

MB121M

Bearing Half Sleeve

Bearing Half Sleeve ASAP can help source this line with documentation review, alternate part checks, condition requirements, and account manager follow-up for urgent or planned procurement.

Jpi Inc
Manufacturer
USA
Origin
—
Spec
N/A
Unit weight
Detailed description

Technical sourcing notes

N/A
Lead time
N/A
Cross references
Unrestricted
Export control
3120 Bearings Plain Unmounted
FSC
Why ASAP

Operations-grade aviation sourcing.

AS9120B
Quality-managed distribution
15 min
Average RFQ response, 24/7
Full trace
Documentation & certs on request
Submit RFQ

Request a quote for MB121M

Send this part to ASAP with quantity, need-by timing, and buyer contact details. An account manager will review availability, alternates, certificates, and delivery options.

Part-specific RFQ

Submit RFQ for MB121M

Send this part to ASAP with quantity, need-by timing, and buyer contact details. A dedicated account manager reviews availability, alternates, certificates, and delivery options.

Bearing Half SleeveMB121M
NSN3120-00-353-7979
Manufacturer
Jpi Inc
CAGE
0AX87
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number MB121M with NSN 3120-00-353-7979, 3120003537979

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120003537979

Item Description:

Bearing Half Sleeve

31200035379790N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
Mb121m695

Characteristics Data of NSN 3120-00-353-7979, 3120003537979

MRCCriteriaCharacteristic
AAUBHOLE DIAMETER0.2500 INCHES NOMINAL FIRST"
ABHPOVERALL LENGTH1.0265 INCHES MINIMUM AND 1.0365 INCHES MAXIMUM"
ADARBODY OUTSIDE DIAMETER2.6565 INCHES MINIMUM AND 2.6570 INCHES MAXIMUM"
ADASBODY INSIDE DIAMETER2.5020 INCHES NOMINAL"
ADZGLUBRICATION MATERIALLUBRICATING OIL"
AGKDDISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING0.5109 INCHES MINIMUM FIRST AND 0.5209 INCHES MAXIMUM FIRST"
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR"
AGKTLOCKING LUG HEIGHT0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM"
AGKULOCKING LUG LENGTH0.1875 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM"
AGKVLOCKING LUG WIDTH0.1780 INCHES MINIMUM AND 0.1830 INCHES MAXIMUM"
BZLXCORNER SHAPESQUARE ALL CORNERS"
CTJMANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE"
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL"
CTRQDISTANCE FROM LUG END TO END OF BEARING0.1260 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM"
MATTMATERIALLEAD ALLOY INNER LAYER"
MATTMATERIALSTEEL COMP 1010 OUTER LAYER"
SFTTSURFACE TREATMENTTIN OVERALL"
STYLSTYLE DESIGNATORHALF SLEEVE, PLAIN, NO OUTSIDE FLANGES"
AAUBHOLE DIAMETER0.2500 INCHES NOMINAL FIRST"
ABHPOVERALL LENGTH1.0265 INCHES MINIMUM AND 1.0365 INCHES MAXIMUM"
ADARBODY OUTSIDE DIAMETER2.6565 INCHES MINIMUM AND 2.6570 INCHES MAXIMUM"
ADASBODY INSIDE DIAMETER2.5020 INCHES NOMINAL"
ADZGLUBRICATION MATERIALLUBRICATING OIL"
AGKDDISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING0.5109 INCHES MINIMUM FIRST AND 0.5209 INCHES MAXIMUM FIRST"
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR"
AGKTLOCKING LUG HEIGHT0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM"
AGKULOCKING LUG LENGTH0.1875 INCHES MINIMUM AND 0.2188 INCHES MAXIMUM"
AGKVLOCKING LUG WIDTH0.1780 INCHES MINIMUM AND 0.1830 INCHES MAXIMUM"
BZLXCORNER SHAPESQUARE ALL CORNERS"
CTJMANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE"
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL"
CTRQDISTANCE FROM LUG END TO END OF BEARING0.1260 INCHES MINIMUM AND 0.1310 INCHES MAXIMUM"
MATTMATERIALLEAD ALLOY INNER LAYER"
MATTMATERIALSTEEL COMP 1010 OUTER LAYER"
SFTTSURFACE TREATMENTTIN OVERALL"
STYLSTYLE DESIGNATORHALF SLEEVE, PLAIN, NO OUTSIDE FLANGES"