If you searching for CAGE code Z0GL9 of Applied Industrial Technologies Inc? NSN Parts Now is your one-stop-shop for parts procurement. We have stock of all your required Parts such as 597308, 597308, 597308, 597308, CR597308 or Seal Plain, Special Features: Skf axial clamp seals are produced in three different DESIGNS:CT1, CT3, and CT4 design; these axial clamp seals are made of appropriately profiled strips of non-reinforced nitrile rubber which are held firmly in place by stainless steel screw-type clamps; they are available in the diameter range 150 to 4600 mm; the seals do not rotate but seal axially against a rotating counterface; CT3 design:the seals of the CT3 design differ from those of the CT1 design only in the form of the sealing lip; this is again flat but is provided with annular grooves; these serve to trap contaminants which may have started to penetrate the lip/counterface contact; the maximum operating interference for these seals is +4, 8 mm; SHAFT:42.500 in.; OD:43.688 in.; WEIGHT:4.250 lbs III Part Name Assigned By Controlling Agency: Axial clamp seals CT3 design Seal Width: 1.125 inches nominal. Unlike other companies, we make sure our customers can talk to a dedicated account manager at any time of the day or week. We offer personalized solutions for all your purchasing problems. As an AS9120B, ISO 9001:2015 certified and FAA AC 0056B accredited company, we are committed to supplying premium products to our customers. All our NSN parts under under CAGE code Z0GL9 are sourced and shipped using our streamlined supply chain. Submit an RFQ today and receive a competitive quote within 15 minutes.